Problems & Solutions

If you do not find your problem described here, use the bootix website search function.
If you do not find a solution there, please contact bootix Technical Support.

PXE / DHCP / BOOTP / TFTP

"DHCP...." followed by "PXE-E51: No DHCP or proxyDHCP offers were received"
"DHCP...." followed by "PXE-E52: proxyDHCP offers were received. No DHCP offers were received"
"DHCP...." followed by "PXE-E53: No boot filename received"
"DHCP...." followed by "PXE-E55: proxyDHCP Service did not reply to request on port 4011"
"DHCP...." followed by "PXE-E11: ARP timeout"
"TFTP...." followed by "PXE-E32: TFTP open timeout"
"TFTP...." followed by "PXE-E35: TFTP read timeout"
"TFTP...." followed by "PXE-E36: Error received from TFTP server"
"TFTP...." followed by "PXE-E38: TFTP cannot open connection"
"TFTP...." followed by "PXE-E39: TFTP cannot read from connection"
"TFTP...." followed by "PXE-E3A: TFTP too many packages"
"TFTP...." followed by "PXE-E3C: TFTP error - Access violation"
"TFTP...." followed by "PXE-E3F: TFTP packet size is invalid"
"TFTP...." followed by "PXE-T01: File not found"
"TFTP download failed" error message
"PXE-E61: Media test failed, check cable" error message
"PXE-EA0: Network boot canceled by keystroke" error message

BootManage Administrator

"STOP: 0x0000007B" bluescreen error after Windows Setup restarts
Can't connect network drive from CMDLINES.TXT file
Windows could not start because the following file is missing or corrupt - NTOSKRNL32.EXE

BootManage Administrator - Windows PE / BartPE boot images

"NTLDR failed" error message
File WINPEX86.ISO / PEBUILDER.ISO could not be loaded - The error code is 16
"Unable to start TCP/IP protocol driver service" error in BartPE
FORMAT.COM does not work in BartPE
Windows PE / BartPE boot image can't access the network
Windows PE / BartPE boot image can't access the hard disk

BootManage Administrator - DOS / Win98 boot images

Setup stops responding (hangs) during file copy
PC hangs while displaying "Please wait while Setup copies files to your hard disk"
"Setup is out of memory and cannot continue" error message
"Setup cannot copy the file filename. Press X to retry, Y to abort" error message
"The password is invalid for \\SERVER\SHARE" error message
Can't connect network drive to installation server
"Access denied" error messages after connecting network drive

Windows unattended installation

Language selection does not work during Windows XP x64 MUI Pack installation
Regional settings do not work when using Windows XP x64 MUI version